65 days
145.1 hours
9 partipants

the building of N622JC

a Zenith CH 750 CruZer

Tail Build Session 10

October 6, 2020 2.2 hours Tail Building Jeremy, Samantha, Anne

Trimmed, drilled, deburred elevator trim tab. Installed with Cleco’s. Installed Trim Motor w/Cleco’s. Cut trim push rod, 125mm. After running the trim with a 9V battery, 125mm is too long. Done for the evening. Tomorrow we will bring the trim all the way in, and adjust the length to have full travel.

NOTE: We ran the elevator trim tonight! This is our first “moving” part!